Publicaciones en las que colabora con Sonia Dopico (32)

2024

  1. Improving the 3D Printability and Mechanical Performance of Biorenewable Soybean Oil-Based Photocurable Resins

    Polymers, Vol. 16, Núm. 7

2022

  1. Flexible 3D Printed Acrylic Composites based on Polyaniline/Multiwalled Carbon Nanotubes for Piezoresistive Pressure Sensors

    Advanced Electronic Materials, Vol. 8, Núm. 12

  2. Lignin as a High-Value Bioaditive in 3D-DLP Printable Acrylic Resins and Polyaniline Conductive Composite

    Polymers, Vol. 14, Núm. 19

  3. Photocurable Printed Piezocapacitive Pressure Sensor Based on an Acrylic Resin Modified with Polyaniline and Lignin

    Advanced Materials Technologies, Vol. 7, Núm. 8

2021

  1. Printability study of a conductive polyaniline/acrylic formulation for 3d printing

    Polymers, Vol. 13, Núm. 13

2020

  1. Photocured conductive PANI/acrylate composites for digital light processing. Influence of HDODA crosslinker in rheological and physicochemical properties

    European Polymer Journal, Vol. 136

2017

  1. Segregated conductive network of MWCNT in PA12/PA6 composites: Electrical and rheological behavior

    Polymer Composites, Vol. 38, Núm. 12, pp. 2679-2686

2016

  1. Influence of polyamide ratio on the CNT dispersion in polyamide 66/6 blends by dilution of PA66 or PA6-MWCNT masterbatches

    Synthetic Metals, Vol. 221, pp. 134-141

  2. MALDI-TOF to compare polysaccharide profiles from commercial health supplements of different mushroom species

    Food Chemistry, Vol. 199, pp. 597-604

  3. Polylactic acid and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nano and microparticles for packaging bioplastic composites

    Polymer Bulletin, Vol. 73, Núm. 12, pp. 3485-3502

2015

  1. Morphology and thermal behavior of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(butylene adipate-co-terephthalate)/clay nanocomposites

    Polymer Composites, Vol. 36, Núm. 11, pp. 2051-2058

  2. Volatile phenols depletion in red wine using molecular imprinted polymers

    Journal of Food Science and Technology, Vol. 52, Núm. 12, pp. 7735-7746

2014

  1. Alumina Whisker Selection to Design Fiber-Reinforced Polyethylene Composites

    Polymer - Plastics Technology and Engineering, Vol. 53, Núm. 11, pp. 1119-1130

  2. Extruded polyaniline/EVA blends: Enhancing electrical conductivity using gallate compatibilizers

    Synthetic Metals, Vol. 189, pp. 193-202

2013

  1. Insight into industrial PLA aging process by complementary use of rheology, HPLC, and MALDI

    Polymers for Advanced Technologies, Vol. 24, Núm. 8, pp. 723-731

  2. Toughening strategies of carbon nanotube/polycarbonate composites with electromagnetic interference shielding properties

    Polymer Composites, Vol. 34, Núm. 11, pp. 1938-1949

2012

  1. Commercial biodegradable material for food contact: Methodology for assessment of service life

    Polymer International, Vol. 61, Núm. 11, pp. 1648-1654

  2. Determination of polyolefin additives by reversed-phase liquid chromatography

    Central European Journal of Chemistry, Vol. 10, Núm. 3, pp. 585-610

  3. Effect of PPG-PEG-PPG on the tocopherol-controlled release from films intended for food-packaging applications

    Journal of Agricultural and Food Chemistry, Vol. 60, Núm. 33, pp. 8163-8170

  4. Preparation, evaluation and characterization of quercetin-molecularly imprinted polymer for preconcentration and clean-up of catechins

    Analytica Chimica Acta, Vol. 721, pp. 68-78