Publicaciones en las que colabora con Luis Barral (56)

2022

  1. Isosorbide plasticized corn starch filled with poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microparticles: Properties and behavior under environmental factors

    International Journal of Biological Macromolecules, Vol. 202, pp. 345-353

2021

  1. Influence of the hydrophilicity of montmorillonite on structure and properties of thermoplastic wheat starch/montmorillonite bionanocomposites

    Polymers for Advanced Technologies, Vol. 32, Núm. 11, pp. 4479-4489

  2. Preparation and characterization of bionanocomposite films based on wheat starch and reinforced with cellulose nanocrystals

    Cellulose, Vol. 28, Núm. 12, pp. 7781-7793

2020

  1. Properties and behavior under environmental factors of isosorbide-plasticized starch reinforced with microcrystalline cellulose biocomposites

    International Journal of Biological Macromolecules, Vol. 164, pp. 2028-2037

2019

  1. Corn starch plasticized with isosorbide and filled with microcrystalline cellulose: Processing and characterization

    Carbohydrate Polymers, Vol. 206, pp. 726-733

2014

  1. Study of thermal and morphological properties of a hybrid system, iPP/POSS. Effect of flame retardance

    Composites Part B: Engineering, Vol. 58, pp. 566-572

2012

  1. Exfoliated/intercalated silicate/hot styrene butadiene rubber nanocomposites: Structure-properties relationship

    Journal of Applied Polymer Science, Vol. 125, Núm. SUPPL. 1

2011

  1. Microstructure, morphology, and mechanical properties of styrene-butadiene rubber/organoclay nanocomposites

    Polymer Engineering and Science, Vol. 51, Núm. 9, pp. 1720-1729

2010

  1. Effect of an epoxy octasilsesquioxane on the thermodegradation of an epoxy/amine system

    Polymer International, Vol. 59, Núm. 1, pp. 112-118

2008

  1. Epoxy/POSS organic-inorganic hybrids: ATR-FTIR and DSC studies

    European Polymer Journal, Vol. 44, Núm. 10, pp. 3035-3045

2005

  1. Influence of the stretching in the crystallinity of biaxially oriented polypropylene (BOPP) films

    Journal of Thermal Analysis and Calorimetry, Vol. 81, Núm. 1, pp. 21-25

  2. Thermodegradation kinetics of a hybrid inorganic-organic epoxy system

    European Polymer Journal, Vol. 41, Núm. 7, pp. 1662-1666

  3. Thermodynamic analysis of phase separation in an epoxy/polystyrene mixture

    Polymer, Vol. 46, Núm. 16, pp. 6114-6121

2004

  1. Effects of a mixture of stabilizers on the structure and mechanical properties of polyethylene during reprocessing

    Journal of Applied Polymer Science, Vol. 92, Núm. 6, pp. 3910-3916

  2. Selection of a precursor of a monofunctional polyhedral oligomeric silsesquioxane reacted with aromatic diamines

    Journal of Applied Polymer Science, Vol. 92, Núm. 3, pp. 1576-1583

  3. Use of a sodium ionomer as a compatibilizer in polypropylene/high-barrier ethylene-vinyl alcohol copolymer blends: The processability of the blends and their physical properties

    Journal of Applied Polymer Science, Vol. 94, Núm. 4, pp. 1763-1770

2003

  1. Kinetic of epoxy resin formation by high-performance liquid chromatography

    Journal of Applied Polymer Science, Vol. 89, Núm. 2, pp. 497-504

  2. Thermal behaviour of a polyhedral oligomeric silsesquioxane with epoxy resin cured by diamines

    Journal of Thermal Analysis and Calorimetry, Vol. 72, Núm. 2, pp. 421-429

2002

  1. Analysis of blends of poly(styrene-co-acrylonitrile) with an epoxy/aromatic amine resin using scanning thermal microscopy

    Journal of Polymer Science, Part B: Polymer Physics, Vol. 40, Núm. 3, pp. 284-289

  2. Blends of acrylonitrile-butadiene-styrene with an epoxy/cycloaliphatic amine resin: Phase-separation behavior and morphologies

    Journal of Applied Polymer Science, Vol. 85, Núm. 6, pp. 1277-1286