Publicaciones (52) Publicaciones en las que ha participado algún/a investigador/a

2016

  1. 3D reconstruction and characterization of laser induced craters by in situ optical microscopy

    Applied Surface Science, Vol. 374, pp. 271-277

  2. A Finite Element Model for Beam to Column Bolted Connections with Semi Rigid Behaviour

    Journal of Wood Science, Vol. 62, Núm. 1, pp. 112

  3. A simple model for automatic analysis and diagnosis of environmental thermal comfort in energy efficient buildings

    Applied Energy, Vol. 177, pp. 60-70

  4. A three-dimensional CFD simulation study to reduce heat stress in ships

    Applied Thermal Engineering, Vol. 94, pp. 413-421

  5. Analysing the possibilities of using fuel cells in ships

    International Journal of Hydrogen Energy, Vol. 41, Núm. 4, pp. 2853-2866

  6. Analysis of fluid hammer occurrence with phase change and column separation due to fast valve opening by means of flow visualization

    Experimental Thermal and Fluid Science, Vol. 79, pp. 143-153

  7. Application of 3D laser manufacturing in fabrication or repair of high-value metal component for the foundry industry

    Advances in Materials and Processing Technologies, Vol. 2, Núm. 4, pp. 539-547

  8. Behaviour of augmented Lagrangian and Hamiltonian methods for multibody dynamics in the proximity of singular configurations

    Nonlinear Dynamics, Vol. 85, Núm. 3, pp. 1491-1508

  9. Buque de Apoyo a Plataformas (BAP): la seguridad desde el diseño

    Ingeniería naval, Núm. 944, pp. 72-75

  10. Characterization of drying paint coatings by dynamic speckle and holographic interferometry measurements

    Applied Optics, Vol. 55, Núm. 17, pp. 4706-4712

  11. Chute de pression lors de l'ébullition en écoulement à l‘intérieur de microcanaux parallèles

    International Journal of Refrigeration, Vol. 72, pp. 111-123

  12. Coexistence of Three Ferroic Orders in the Multiferroic Compound [(CH3)4N][Mn(N3)3] with Perovskite-Like Structure

    Chemistry - A European Journal, Vol. 22, Núm. 23, pp. 7863-7870

  13. Cost assessment methodology for combined wind and wave floating offshore renewable energy systems

    Renewable Energy, Vol. 97, pp. 866-880

  14. Costs and feasibility of repowering wind farms

    Energy Sources, Part B: Economics, Planning and Policy, Vol. 11, Núm. 10, pp. 974-981

  15. Creep analysis of silicone for podiatry applications

    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 63, pp. 456-469

  16. Decision variables for floating offshore wind farms based on life-cycle cost: The case study of Galicia (North-West of Spain)

    Ocean Engineering, Vol. 127, pp. 114-123

  17. Dielectric properties induced by the framework in the hybrid organic-inorganic compounds M(dca)2pyz M = Fe, Co and Zn

    Polyhedron, Vol. 114, pp. 249-255

  18. Economic feasibility of floating offshore wind farms

    Energy, Vol. 112, pp. 868-882

  19. Effect of carbonitriding in a salt bath by a QPQ scheme on stainless steel 321 microstructure and service properties

    Metal Science and Heat Treatment, Vol. 58, Núm. 5-6, pp. 369-375

  20. Effectiveness and harmfulness evaluation of graffiti cleaning by mechanical, chemical and laser procedures on granite

    Microchemical Journal, Vol. 125, pp. 1-9