Publicaciones (120) Publicaciones de Armando José Yáñez Casal

2021

  1. Effect of alloying elements on laser surface modification of powder metallurgy to improve surface mechanical properties of beta titanium alloys for biomedical application

    Journal of Materials Research and Technology, Vol. 14, pp. 1222-1234

  2. Laser surface modification in Ti-xNb-yMo alloys prepared by powder metallurgy

    Metals, Vol. 11, Núm. 2, pp. 1-21

  3. Study of the influence of the oscillation frequency on the surface hardening process of the 42CrMo4 alloy using an oscillating laser beam

    Surface and Coatings Technology, Vol. 409

2020

  1. Análisis de las causas que reducen las tasas de éxito de una asignatura de física de primer curso en grados de Ingeniería Industrial

    Panorama actual de la enseñanza de las ciencias (Fundación editora), pp. 671-675

  2. Characterization of TiNb Alloys Obtained in situ by Laser Metal Deposition

    Euro PM 2018 Congress and Exhibition

  3. Laser cladding of MCrAlY alloys

    Laser Cladding of Metals (Springer International Publishing), pp. 363-394

2019

  1. A comparison of laser deposition of commercially pure titanium using gas atomized or Ti sponge powders

    Surface and Coatings Technology, Vol. 374, pp. 253-263

  2. High-pressure and -temperature spinning capillary cell for in situ synchrotron X-ray powder diffraction

    Journal of Synchrotron Radiation, Vol. 26, pp. 1238-1244

  3. Rietveld quantitative phase analysis of oil well cement: In Situ hydration study at 150 Bars and 150 °C

    Materials, Vol. 12, Núm. 12

2018

  1. Laser surface tempering of hardened chromium-molybdenum alloyed steel

    Procedia CIRP

  2. Mechanical and microstructural characterization of MCrAlY coatings produced by laser cladding: The influence of the Ni, Co and Al content

    Surface and Coatings Technology, Vol. 338, pp. 22-31

2017

  1. Desarrollo y caracterización de recubrimientos láser MCrAIY para aplicaciones de barrera térmica

    Trater Press: revista del tratamiento térmico, Núm. 59, pp. 18-27

  2. Desarrollo y caracterización de recubrimientos láser MCrAIY para aplicaciones de barrera térmica

    Trater Press: revista del tratamiento térmico, Núm. 58, pp. 30-39

2016

  1. A study on the effects of the use of gas or water atomized AISI 316L steel powder on the corrosion resistance of laser deposited material

    Physics Procedia

  2. Application of 3D laser manufacturing in fabrication or repair of high-value metal component for the foundry industry

    Advances in Materials and Processing Technologies, Vol. 2, Núm. 4, pp. 539-547

  3. Inspection of powder flow during LMD deposition by high speed imaging

    Physics Procedia

2015

  1. Assessment of the quality of a Master on Photonics in Galicia, Spain

    Proceedings of SPIE - The International Society for Optical Engineering

  2. Characterization of hard coatings produced by laser cladding using laser-induced breakdown spectroscopy technique

    Applied Surface Science

  3. High temperature oxidation behavior of laser cladding MCrAlY coatings on austenitic stainless steel

    Surface and Coatings Technology, Vol. 270, pp. 243-248

  4. Laser Additive Manufacturing of High Added Value Pieces

    Procedia Engineering