Publications by the researcher in collaboration with María José Abad López (35)

2005

  1. Influence of the stretching in the crystallinity of biaxially oriented polypropylene (BOPP) films

    Journal of Thermal Analysis and Calorimetry, Vol. 81, Núm. 1, pp. 21-25

2004

  1. Effects of a mixture of stabilizers on the structure and mechanical properties of polyethylene during reprocessing

    Journal of Applied Polymer Science, Vol. 92, Núm. 6, pp. 3910-3916

  2. Selection of a precursor of a monofunctional polyhedral oligomeric silsesquioxane reacted with aromatic diamines

    Journal of Applied Polymer Science, Vol. 92, Núm. 3, pp. 1576-1583

  3. Study of the Effect of Poly(acrylonitrile-co-butadiene-co-styrene) on the Mechanical Properties of an Epoxy System

    Journal of Applied Polymer Science, Vol. 92, Núm. 1, pp. 461-467

  4. Use of a sodium ionomer as a compatibilizer in polypropylene/high-barrier ethylene-vinyl alcohol copolymer blends: The processability of the blends and their physical properties

    Journal of Applied Polymer Science, Vol. 94, Núm. 4, pp. 1763-1770

2003

  1. Thermal behaviour of a polyhedral oligomeric silsesquioxane with epoxy resin cured by diamines

    Journal of Thermal Analysis and Calorimetry, Vol. 72, Núm. 2, pp. 421-429

2002

  1. Analysis of blends of poly(styrene-co-acrylonitrile) with an epoxy/aromatic amine resin using scanning thermal microscopy

    Journal of Polymer Science, Part B: Polymer Physics, Vol. 40, Núm. 3, pp. 284-289

  2. Blends of acrylonitrile-butadiene-styrene with an epoxy/cycloaliphatic amine resin: Phase-separation behavior and morphologies

    Journal of Applied Polymer Science, Vol. 85, Núm. 6, pp. 1277-1286

  3. Characterization of an ABS-modified epoxy system

    Polymer International, Vol. 51, Núm. 11, pp. 1268-1276

  4. Characterization of biaxially oriented polypropylene films by atomic force microscopy and microthermal analysis

    Journal of Applied Polymer Science, Vol. 85, Núm. 7, pp. 1553-1561

  5. Dynamic mechanical analysis of an epoxy/thermoplastic blend: Polymerization induced phase separation

    Polymer International, Vol. 51, Núm. 10, pp. 1100-1106

  6. Isothermal curing by dynamic mechanical analysis of three epoxy resin systems: Gelation and vitrification

    Journal of Applied Polymer Science, Vol. 83, Núm. 1, pp. 78-85

  7. Study of the physical aging of an epoxy/cycloaliphatic amine resin modified with ABS

    Journal of Thermal Analysis and Calorimetry

2001

  1. Effect of poly(styrene-co-acrylonitrile) on the curing of an epoxy/amine resin

    Polymer, Vol. 42, Núm. 4, pp. 1669-1677

  2. Effect of water sorption on the structure and mechanical properties of an epoxy resin system

    Journal of Applied Polymer Science, Vol. 80, Núm. 1, pp. 71-80

  3. Enthalpy relaxation in an epoxy-cycloaliphatic amine resin

    Colloid and Polymer Science, Vol. 279, Núm. 2, pp. 184-189

  4. Thermal decomposition behavior and the mechanical properties of an epoxy/cycloaliphatic amine resin with ABS

    European Polymer Journal, Vol. 37, Núm. 8, pp. 1613-1623

2000

  1. Blends of an epoxy/cycloaliphatic amine resin with poly(ether imide)

    Polymer, Vol. 41, Núm. 7, pp. 2657-2666

  2. Cure kinetics of amine-cured diglycidyl ether of bisphenol: A epoxy blended with poly(ether imide)

    Thermochimica Acta, Vol. 344, Núm. 1-2, pp. 127-136

  3. Decomposition behavior of epoxy-resin systems cured by diamines

    European Polymer Journal, Vol. 36, Núm. 6, pp. 1231-1240