Publicaciones en las que colabora con Jesús Cano Malagón (44)

2008

  1. Mechanism of thermal degradation of an inorganic-organic hybrid based on an epoxy-POSS

    Macromolecular Symposia, Vol. 267, Núm. 1, pp. 74-78

2005

  1. Influence of the stretching in the crystallinity of biaxially oriented polypropylene (BOPP) films

    Journal of Thermal Analysis and Calorimetry, Vol. 81, Núm. 1, pp. 21-25

2004

  1. Effects of a mixture of stabilizers on the structure and mechanical properties of polyethylene during reprocessing

    Journal of Applied Polymer Science, Vol. 92, Núm. 6, pp. 3910-3916

  2. Selection of a precursor of a monofunctional polyhedral oligomeric silsesquioxane reacted with aromatic diamines

    Journal of Applied Polymer Science, Vol. 92, Núm. 3, pp. 1576-1583

  3. Use of a sodium ionomer as a compatibilizer in polypropylene/high-barrier ethylene-vinyl alcohol copolymer blends: The processability of the blends and their physical properties

    Journal of Applied Polymer Science, Vol. 94, Núm. 4, pp. 1763-1770

2003

  1. Thermal behaviour of a polyhedral oligomeric silsesquioxane with epoxy resin cured by diamines

    Journal of Thermal Analysis and Calorimetry, Vol. 72, Núm. 2, pp. 421-429

2002

  1. Analysis of blends of poly(styrene-co-acrylonitrile) with an epoxy/aromatic amine resin using scanning thermal microscopy

    Journal of Polymer Science, Part B: Polymer Physics, Vol. 40, Núm. 3, pp. 284-289

  2. Blends of acrylonitrile-butadiene-styrene with an epoxy/cycloaliphatic amine resin: Phase-separation behavior and morphologies

    Journal of Applied Polymer Science, Vol. 85, Núm. 6, pp. 1277-1286

  3. Characterization of an ABS-modified epoxy system

    Polymer International, Vol. 51, Núm. 11, pp. 1268-1276

  4. Characterization of biaxially oriented polypropylene films by atomic force microscopy and microthermal analysis

    Journal of Applied Polymer Science, Vol. 85, Núm. 7, pp. 1553-1561

  5. Dynamic mechanical analysis of an epoxy/thermoplastic blend: Polymerization induced phase separation

    Polymer International, Vol. 51, Núm. 10, pp. 1100-1106

  6. Isothermal curing by dynamic mechanical analysis of three epoxy resin systems: Gelation and vitrification

    Journal of Applied Polymer Science, Vol. 83, Núm. 1, pp. 78-85

  7. Study of the physical aging of an epoxy/cycloaliphatic amine resin modified with ABS

    Journal of Thermal Analysis and Calorimetry

2001

  1. Effect of poly(styrene-co-acrylonitrile) on the curing of an epoxy/amine resin

    Polymer, Vol. 42, Núm. 4, pp. 1669-1677

  2. Effect of water sorption on the structure and mechanical properties of an epoxy resin system

    Journal of Applied Polymer Science, Vol. 80, Núm. 1, pp. 71-80

  3. Enthalpy relaxation in an epoxy-cycloaliphatic amine resin

    Colloid and Polymer Science, Vol. 279, Núm. 2, pp. 184-189

  4. Thermal decomposition behavior and the mechanical properties of an epoxy/cycloaliphatic amine resin with ABS

    European Polymer Journal, Vol. 37, Núm. 8, pp. 1613-1623

2000

  1. Blends of an epoxy/cycloaliphatic amine resin with poly(ether imide)

    Polymer, Vol. 41, Núm. 7, pp. 2657-2666

  2. Cure kinetics of amine-cured diglycidyl ether of bisphenol: A epoxy blended with poly(ether imide)

    Thermochimica Acta, Vol. 344, Núm. 1-2, pp. 127-136

  3. Decomposition behavior of epoxy-resin systems cured by diamines

    European Polymer Journal, Vol. 36, Núm. 6, pp. 1231-1240