Publicaciones (52) Publicaciones de José Manuel Amado Paz

2022

  1. Influence of Femtosecond Laser Modification on Biomechanical and Biofunctional Behavior of Porous Titanium Substrates

    Materials, Vol. 15, Núm. 9

2021

  1. Effect of alloying elements on laser surface modification of powder metallurgy to improve surface mechanical properties of beta titanium alloys for biomedical application

    Journal of Materials Research and Technology, Vol. 14, pp. 1222-1234

  2. Laser surface modification in Ti-xNb-yMo alloys prepared by powder metallurgy

    Metals, Vol. 11, Núm. 2, pp. 1-21

  3. Tribo-mechanical and cellular behavior of superficially modified porous titanium samples using femtosecond laser

    Surface and Coatings Technology, Vol. 422

2020

  1. Boron addition in a non-equiatomic Fe50Mn30Co10Cr10 alloy manufactured by laser cladding: Microstructure and wear abrasive resistance

    Applied Surface Science, Vol. 515

  2. Characterization of TiNb Alloys Obtained in situ by Laser Metal Deposition

    Euro PM 2018 Congress and Exhibition

  3. Efecto en la microestructura de la fusión por láser de aleaciones Ti-Nb

    TRATERMAT 2019: XVI Congreso Internacional de Tratamientos Térmicos y de Superficie

  4. Modificación de las propiedades mecánicas de aleaciones Ti-Nb-Mo mediante fusión superficial por láser

    TRATERMAT 2019: XVI Congreso Internacional de Tratamientos Térmicos y de Superficie

  5. Surface laser remelting of pressed and sintered Ti35Nb6Mo βeTa alloy

    Euro PM 2018 Congress and Exhibition

  6. Surface modification of porous titanium discs using femtosecond laser structuring

    Metals, Vol. 10, Núm. 6, pp. 1-18

2019

  1. A comparison of laser deposition of commercially pure titanium using gas atomized or Ti sponge powders

    Surface and Coatings Technology, Vol. 374, pp. 253-263

  2. Experimental investigation of the CHF of HFE-7100 under pool boiling conditions on differently roughened surfaces

    International Journal of Heat and Mass Transfer, Vol. 139, pp. 269-279

2017

  1. Effects of Laser Surface Melting on Ti–30Nb–2Sn Sintered Alloy

    Advanced Engineering Materials, Vol. 19, Núm. 6

2016

  1. A study on the effects of the use of gas or water atomized AISI 316L steel powder on the corrosion resistance of laser deposited material

    Physics Procedia

  2. Application of 3D laser manufacturing in fabrication or repair of high-value metal component for the foundry industry

    Advances in Materials and Processing Technologies, Vol. 2, Núm. 4, pp. 539-547

  3. Inspection of powder flow during LMD deposition by high speed imaging

    Physics Procedia

2015

  1. Characterization of hard coatings produced by laser cladding using laser-induced breakdown spectroscopy technique

    Applied Surface Science

2014

  1. Análisis geométrico y microestructural de recubrimientos de NiCoCrAlYTa proyectados por láser sobre láminas de acero inoxidable AISI 316L

    Revista Latinoamericana de Metalurgia y Materiales, Vol. 34, Núm. 2, pp. 209-217

  2. Laser cladding of MCrAlY coatings on stainless steel

    Physics Procedia

  3. Laser cladding of Ni-WC layers with graded WC content

    Physics Procedia