Publicaciones (117) Publicaciones de María José Abad López

2024

  1. Exploring the mechanical, rheological, and thermal performance of self-reinforced composites based on polyamides and multi-walled carbon nanotubes

    Journal of Applied Polymer Science, Vol. 141, Núm. 23

  2. Improving the 3D Printability and Mechanical Performance of Biorenewable Soybean Oil-Based Photocurable Resins

    Polymers, Vol. 16, Núm. 7

  3. Marine degradation and ecotoxicity of conventional, recycled and compostable plastic bags

    Environmental Pollution, Vol. 351

  4. Multifunctional nanocomposites based on a polyamide 6/polyamide 12 blend and multi-walled carbon nanotubes

    Polymer Engineering and Science, Vol. 64, Núm. 3, pp. 1246-1257

2023

  1. Enhancement of 3D Printability by FDM and Electrical Conductivity of PLA/MWCNT Filaments Using Lignin as Bio-Dispersant

    Polymers, Vol. 15, Núm. 4

  2. Flexible thermoelectric energy harvesting system based on polymer composites

    Chemical Engineering Journal, Vol. 473

  3. Trabajando el consumo responsable y la inclusión a través de experiencias de AprendizajeServicio (ApS) en las ingenierías

    El Aprendizaje-Servicio universitario ante los retos de la Agenda 2030 (UNED - Universidad Nacional de Educación a Distancia), pp. 300-309

2022

  1. Estudo sobre a violencia e acoso sexual na Universidade da Coruña ed. lit.

    Servizo de Publicacións

  2. Flexible 3D Printed Acrylic Composites based on Polyaniline/Multiwalled Carbon Nanotubes for Piezoresistive Pressure Sensors

    Advanced Electronic Materials, Vol. 8, Núm. 12

  3. Last developments in polymers for wearable energy storage devices

    International Journal of Energy Research, Vol. 46, Núm. 8, pp. 10475-10498

  4. Lignin as a High-Value Bioaditive in 3D-DLP Printable Acrylic Resins and Polyaniline Conductive Composite

    Polymers, Vol. 14, Núm. 19

  5. Photocurable Printed Piezocapacitive Pressure Sensor Based on an Acrylic Resin Modified with Polyaniline and Lignin

    Advanced Materials Technologies, Vol. 7, Núm. 8

  6. Polyethylene/ poly(3-hydroxybutyrate-co-3-hydroxyvalerate /carbon nanotube composites for eco-friendly electronic applications

    Polymer Testing, Vol. 112

2021

  1. Printability study of a conductive polyaniline/acrylic formulation for 3d printing

    Polymers, Vol. 13, Núm. 13

2020

  1. Experimental and numerical investigation of the extrusion and deposition process of a poly(Lactic acid) strand with fused deposition modeling

    Polymers, Vol. 12, Núm. 12, pp. 1-20

  2. Metodoloxías e ferramentas útiles para desenvolver un proxecto de Aprendizaxe-Servizo

    Contextos universitarios tranformadores: boas prácticas no marco dos GID

  3. Photocured conductive PANI/acrylate composites for digital light processing. Influence of HDODA crosslinker in rheological and physicochemical properties

    European Polymer Journal, Vol. 136

2019

  1. Aprendendo e recordando xuntos experiencias ApS con persoas con enfermidade mental e Síndrome de Down

    Contextos universitarios transformadores: construíndo espazos de aprendizaxe.

  2. Effect of the Processing-Induced Morphology on the Mechanical Properties of Biodegradable Extruded Films Based on Poly(lactic acid) (PLA) Blends

    Journal of Polymers and the Environment, Vol. 27, Núm. 11, pp. 2325-2333

2018

  1. Desenvolvemento de competencias en estudantes implicados e non implicados nunha experiencia aprendizaxe-servizo

    Contextos universitarios transformadores: retos e ideas innovadoras. II Xornadas de Innovación Docente