Publicaciones en las que colabora con Sonia Dopico (18)

2024

  1. Comparing lignin and spent coffee grounds as bio-fillers in PLA 3D-printable filaments

    Polymer Composites, Vol. 45, Núm. 16, pp. 14566-14579

  2. Improving the 3D Printability and Mechanical Performance of Biorenewable Soybean Oil-Based Photocurable Resins

    Polymers, Vol. 16, Núm. 7

  3. Rheology of Conducting Polymer Composites for 3D Printing Electronic Applications

    Springer Proceedings in Materials (Springer), pp. 117-120

2022

  1. Flexible 3D Printed Acrylic Composites based on Polyaniline/Multiwalled Carbon Nanotubes for Piezoresistive Pressure Sensors

    Advanced Electronic Materials, Vol. 8, Núm. 12

  2. Lignin as a High-Value Bioaditive in 3D-DLP Printable Acrylic Resins and Polyaniline Conductive Composite

    Polymers, Vol. 14, Núm. 19

  3. Photocurable Printed Piezocapacitive Pressure Sensor Based on an Acrylic Resin Modified with Polyaniline and Lignin

    Advanced Materials Technologies, Vol. 7, Núm. 8

2021

  1. Printability study of a conductive polyaniline/acrylic formulation for 3d printing

    Polymers, Vol. 13, Núm. 13

2020

  1. Photocured conductive PANI/acrylate composites for digital light processing. Influence of HDODA crosslinker in rheological and physicochemical properties

    European Polymer Journal, Vol. 136

2017

  1. Segregated conductive network of MWCNT in PA12/PA6 composites: Electrical and rheological behavior

    Polymer Composites, Vol. 38, Núm. 12, pp. 2679-2686

2016

  1. Influence of polyamide ratio on the CNT dispersion in polyamide 66/6 blends by dilution of PA66 or PA6-MWCNT masterbatches

    Synthetic Metals, Vol. 221, pp. 134-141

2014

  1. Alumina Whisker Selection to Design Fiber-Reinforced Polyethylene Composites

    Polymer - Plastics Technology and Engineering, Vol. 53, Núm. 11, pp. 1119-1130

  2. Extruded polyaniline/EVA blends: Enhancing electrical conductivity using gallate compatibilizers

    Synthetic Metals, Vol. 189, pp. 193-202

2013

  1. Insight into industrial PLA aging process by complementary use of rheology, HPLC, and MALDI

    Polymers for Advanced Technologies, Vol. 24, Núm. 8, pp. 723-731

  2. Toughening strategies of carbon nanotube/polycarbonate composites with electromagnetic interference shielding properties

    Polymer Composites, Vol. 34, Núm. 11, pp. 1938-1949

2012

  1. Commercial biodegradable material for food contact: Methodology for assessment of service life

    Polymer International, Vol. 61, Núm. 11, pp. 1648-1654

  2. Relationships between electrical, mechanical properties and morphology of PC/CNT composites

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

2011

  1. Natural extracts as potential source of antioxidants to stabilize polyolefins

    Journal of Applied Polymer Science, Vol. 119, Núm. 6, pp. 3553-3559

2004

  1. Extraction and quantification of antioxidants from low-density polyethylene by microwave energy and liquid chromatography

    Analytica Chimica Acta, Vol. 521, Núm. 2, pp. 179-188