Publicaciones en las que colabora con Jesús Cano Malagón (52)

2014

  1. Fracture and thermal behaviour of biomass ash polypropylene composites

    Journal of Thermoplastic Composite Materials, Vol. 27, Núm. 4, pp. 481-497

  2. Structure-fracture properties relationship for Polypropylene reinforced with fly ash with and without maleic anhydride functionalized isotactic Polypropylene as coupling agent

    Materials and Design, Vol. 55, pp. 85-92

2010

  1. Effect of aminomethoxy silane and olefin block copolymer on rheomechanical and morphological behavior of fly ash-filled polypropylene composites

    Rheologica Acta, Vol. 49, Núm. 6, pp. 607-618

  2. Rheological, thermal, and mechanical characterization of fly ash-thermoplastic composites with different coupling agents

    Polymer Composites, Vol. 31, Núm. 10, pp. 1722-1730

2009

  1. Deformation and failure behavior of environmentally friendly composites

    12th International Conference on Fracture 2009, ICF-12

  2. Deformation and fracture behavior of PP/ash composites

    Composite Interfaces, Vol. 16, Núm. 2-3, pp. 97-114

2008

  1. Mechanism of thermal degradation of an inorganic-organic hybrid based on an epoxy-POSS

    Macromolecular Symposia, Vol. 267, Núm. 1, pp. 74-78

2005

  1. Influence of the stretching in the crystallinity of biaxially oriented polypropylene (BOPP) films

    Journal of Thermal Analysis and Calorimetry, Vol. 81, Núm. 1, pp. 21-25

2004

  1. Effects of a mixture of stabilizers on the structure and mechanical properties of polyethylene during reprocessing

    Journal of Applied Polymer Science, Vol. 92, Núm. 6, pp. 3910-3916

  2. Selection of a precursor of a monofunctional polyhedral oligomeric silsesquioxane reacted with aromatic diamines

    Journal of Applied Polymer Science, Vol. 92, Núm. 3, pp. 1576-1583

  3. Study of the Effect of Poly(acrylonitrile-co-butadiene-co-styrene) on the Mechanical Properties of an Epoxy System

    Journal of Applied Polymer Science, Vol. 92, Núm. 1, pp. 461-467

  4. Use of a sodium ionomer as a compatibilizer in polypropylene/high-barrier ethylene-vinyl alcohol copolymer blends: The processability of the blends and their physical properties

    Journal of Applied Polymer Science, Vol. 94, Núm. 4, pp. 1763-1770

2003

  1. Thermal behaviour of a polyhedral oligomeric silsesquioxane with epoxy resin cured by diamines

    Journal of Thermal Analysis and Calorimetry, Vol. 72, Núm. 2, pp. 421-429

2002

  1. Analysis of blends of poly(styrene-co-acrylonitrile) with an epoxy/aromatic amine resin using scanning thermal microscopy

    Journal of Polymer Science, Part B: Polymer Physics, Vol. 40, Núm. 3, pp. 284-289

  2. Blends of acrylonitrile-butadiene-styrene with an epoxy/cycloaliphatic amine resin: Phase-separation behavior and morphologies

    Journal of Applied Polymer Science, Vol. 85, Núm. 6, pp. 1277-1286

  3. Characterization of an ABS-modified epoxy system

    Polymer International, Vol. 51, Núm. 11, pp. 1268-1276

  4. Characterization of biaxially oriented polypropylene films by atomic force microscopy and microthermal analysis

    Journal of Applied Polymer Science, Vol. 85, Núm. 7, pp. 1553-1561

  5. Dynamic mechanical analysis of an epoxy/thermoplastic blend: Polymerization induced phase separation

    Polymer International, Vol. 51, Núm. 10, pp. 1100-1106

  6. Isothermal curing by dynamic mechanical analysis of three epoxy resin systems: Gelation and vitrification

    Journal of Applied Polymer Science, Vol. 83, Núm. 1, pp. 78-85

  7. Study of the physical aging of an epoxy/cycloaliphatic amine resin modified with ABS

    Journal of Thermal Analysis and Calorimetry