Theoretical model for further development of intumescent substances to remediate smoldering in wood fiber insulation panels

  1. Pablo Guindos 1
  2. Gaspar Auad 2
  3. Torsten Kolb 3
  1. 1 Pontificia Universidad Católica de Chile, Timber Innovation Centre CIM-UC CORMA, Santiago, Chile // Pontificia Universidad Católica de Chile, Department of Structural and Geotechnical Engineering, Santiago, Chile // Pontificia Universidad Católica de Chile, Department of Construction Engineering and Management, Santiago, Chile
  2. 2 Pontificia Universidad Católica de Chile, Department of Structural and Geotechnical Engineering, Santiago, Chile
  3. 3 Fraunhofer Wihelm-Klauditz-Institut, Center for Light and Environmentally-Friendly Structures ZELUBA, Braunschweig, Germany
Show affiliations +
Journal:
Maderas: Ciencia y tecnología

ISSN: 0717-3644,  0718-221X

Year of publication: 2021

Volume: 23

Issue: 1

Type: Article

DIALNET GOOGLE SCHOLAR lock_openDialnet editor

More publications in: Maderas: Ciencia y tecnología

Abstract

Wood fiber insulation boards, as many other wooden materials, are susceptible to smolder. This type of slow and flameless thermal degradation has three upmost important drawbacks. First, smoldering can develop unseen until damages are noticed; second, it does not need any external heat to keep progressing, thus behaving as a self-sustaining process; third, it may shift into flaming combustion. Although wooden insulation materials are very competitive as insulators, its use is not permitted in several countries beyond mid-rise buildings due to smoldering hazard. As measuring of physical parameters is difficult and expensive at high temperatures, the objective of this investigation was to develop a theoretical model that comprises most relevant physical phenomena in order to serve as a supportive tool for further development of fire-retardant substances. The constructed model presents the novelty that it can simulate the self-sustaining smoldering without needing any external radiation heat, but only the self-heating generated by its own exothermic reactions. The model was built based on a program of experimental testing that included thermo-gravimetric analyses and differential-scanning calorimetry, being able to predict particle degradation at different heating rates and oxygen concentrations with errors of about 7,5 %. The adequacy of the model was also compared at the structural scale against a non-standard cone calorimeter test with terminal switching off heat radiation to emulate self-sustaining smoldering, which was used as model validation showing fits of about 23 % in consideration of mass loss, mass-loss rate and temperature profile. A comprehensive sensitivity analysis comprising 60 distinct parameters permitted to thoroughly assess the influence of each model input parameter, which is being presented as a ranking from the most to the less influencing parameters that prevent or foster self-sustaining smoldering. Several unexpected conclusions raised, positioning species’ densities, capacities and reaction activation energies as the most important parameters. To the best knowledge of the authors, this is the first model that can simulate the self-sustaining smoldering of wooden insulation materials, so it is expected to contribute on further development of fire retardant compounds for wooden products

Bibliographic References

  • Al-Homoud, M.S. 2005. Performance characteristics and practical applications of common building thermal insulation materials. Build Environ 40(3): 353-366. https://doi.org/10.1016/j.buildenv.2004.05.013
  • Alifanov, O.M. 2012. Inverse heat transfer problems. Springer Verlag, Berlin-Heidelberg, Germany. https://doi.org/10.1007/978-3-642-76436-3
  • Anca-Couce, A.; Zobel, N.; Berger, A.; Behrendt, F. 2012. Smouldering of pine wood: Kinetics and reaction heats. Combust Flame 159(4): 1708-1719. https://doi.org/10.1016/j.combustflame.2011.11.015
  • Angst, V.; Malo, K.A. 2010. Moisture induced stresses perpendicular to the grain in glulam: review and evaluation of the relative importance of models and parameters. Holzforschung 64(5): 609-617. https://doi.org/10.1515/hf.2010.089
  • Di Blasi, C. 1993. Analysis of convection and secondary reaction effects within porous solid fuels undergoing pyrolysis. Combust Sci Technol 90: 315-340. https://www.tandfonline.com/doi/abs/10.1080/00102209308907620
  • Brombacher, V.; Michel, F.; Niemz, P.; Volkmer, T. 2012. Untersuchungen zu Wärmeleitfähigkeit und Feuchteverhalten von Holzfaserplatten und Materialkombinationen. Bauphysik 34(4): 157-169. https://doi.org/10.1002/bapi.201200020
  • Bryden, K.M.; Kenneth, W.R.; Christopher, J.R. 2002. Modeling thermally thick pyrolysis of wood. Biomass Bioenerg 22(1): 41-53. https://doi.org/10.1016/S0961-9534(01)00060-5
  • Das, O. 1999. Modelltheoretische Untersuchungen von Schwel- und Glimmbränden in Dämmschichten, Simulation von Schwel- und Glimmbränden in Cellulose.
  • Fortschritt-Berichte VDI Nr. 154. VDI Verlag, Düsseldorf, Germany. https://portal.dnb.de/opac.htm?method=simpleSearch&cqlMode=true&query=idn%3D957371713
  • Grønli, M.G. 1996. A theoretical and experimental study of the thermal degradation of biomass. PhD Dissertation, The Norwegian University of Science and Technology, Trondheim, Norway. https://www.osti.gov/etdeweb/servlets/purl/642467
  • Guindos, P; Michel, C; Weichert, C. 2016. Numerical Model to Quantify the Influence of the Cellulosic Substrate on the Ignition Propensity Tests. Beitr Tab Forsch Int 27(3): 102-112. https://doi.org/10.1515/cttr-2016-0012
  • Guindos, P.; Patel, A.; Kolb, T.; Meinlschmidt, P.; Schlüter, F.; Plinke, B. 2018. Experimental and Numerical Characterization of the Influence of a Smoldering Cellulosic Substrate on a Cigarette’s Ignition Propensity Test. Fire Technol 54: 669-688. https://doi.org/10.1007/s10694-017-0699-2
  • International Standard Organization. 2002. ISO 5660‐1: Reaction‐to‐fire tests‐Heat release, smoke production and mass loss rate‐Part 1: heat release rate (cone calorimeter method). ISO, Geneva, Switzerland. https://www.iso.org/standard/35351.html
  • Kolb, T.; Neumann, M.; Rüther, N.; Guindos, P. 2017. Glimmbeschleunigung als neuer Materialkennwert. Holztechnologie 58(4): 23-28. https://www.ihd-dresden.com/fileadmin/user_upload/pdf/IHD/wissensportal/HOT/Inhaltsverzeichnisse/2017/04_Inhalt_2017_4.pdf
  • König, J. 2006. Effective thermal actions and thermal properties of timber members in natural fires. Fire Mater 30(1): 51-63. https://doi.org/10.1002/fam.898
  • Lautenberger, C. 2007. A generalized pyrolysis model for combustible solids. PhD Dissertation, University of California Berkeley, CA, USA. https://escholarship.org/uc/item/7wz5m7dg
  • Lautenberger, C. 2014. Gpyro–A Generalized Pyrolysis Model for Combustible Solids Technical Reference. 2014 Edition, Reax Engineering Inc., Berkeley, CA, USA. http://reaxfire.com/trac/gpyro/export/507/gpyro/documentation/gpyro_users_guide.pdf
  • MacPhee, S.L.; Gerhard, J.I.; Rein, G. 2012. A novel method for simulating smoldering propagation and its application to STAR (Self-sustaining Treatment for Active Remediation). Environ Mmodell Softw 31: 84-98. https://doi.org/10.1016/j.envsoft.2011.11.004
  • Miyafuji, H.; Saka, S. 1997. Fire-resisting properties in several TiO2 wood-inorganic composites and their topochemistry. Wood Sci Technol 31: 449-455. https://doi.org/10.1007/BF00702567
  • Moallemi, M.K.; Zhang, H.; Kumar, S. 1993. Numerical modeling of two-dimensional smoldering processes. Combust Flame 95(1): 170-182. https://doi.org/10.1016/0010-2180(93)90059-C
  • Ohlemiller, T.J. 1991. Smoldering combustion propagation on solid wood. Fire Saf Sci 3: 565-574. http://www.iafss.org/publications/fss/3/565
  • Ragland, K.W.; Aerts, D.J.; Baker, A.J. 1991. Properties of wood for combustion analysis. Bioresour Technol 37(2): 161-168. https://doi.org/10.1016/0960-8524(91)90205-X
  • Rashwan, T.L.; Gerhard, J.I.; Grant, G.P. 2016. Application of self-sustaining smouldering combustion for the destruction of wastewater biosolids. Waste Manage 50: 201-212. https://doi.org/10.1016/j.wasman.2016.01.037
  • Saka, S.; Ueno, T. 1997. Several SiO2 wood-inorganic composites and their fire-resisting properties. Wood Sci Technol 31: 457-466. https://doi.org/10.1007/BF00702568
  • Sonderegger, W.U. 2011. Experimental and theoretical investigations on the heat and water transport in wood and wood-based materials. PhD Dissertation, ETH, Switzerland. https://www.research-collection.ethz.ch/handle/20.500.11850/152766
  • de Souza Costa, F.; Sandberg, D. 2004. Mathematical model of a smoldering log. Combust Flame 139(3): 227-238. https://doi.org/10.1016/j.combustflame.2004.07.009
  • Steen-Hansen, A.; Mikalsen, R.F.; Jensen, U.E. 2018. Smouldering combustion in loose-fill wood fibre thermal insulation: an experimental study. Fire Technol 54: 1585-1608. https://doi.org/10.1007/s10694-018-0757-4
  • Switzer, C.; Pironi, P.; Gerhard, J.I.; Rein, G.; Torero, J.L. 2009. Self-sustaining smoldering combustion: a novel remediation process for non-aqueous-phase liquids in porous media. Environ Sci Technol 43(15): 5871-5877. https://doi.org/10.1021/es803483s
  • Walther, D.C.; Anthenien, R.A.; Fernandez-Pello, A.C. 2000. Smolder ignition of polyurethane foam: effect of oxygen concentration. Fire Safety J 34(4): 343-359. https://doi.org/10.1016/S0379-7112(00)00007-2
  • Wang, Q.; Li, J.; Winandy, J.E. 2004. Chemical mechanism of fire retardance of boric acid on wood. Wood Sci Technol 38: 375-389. https://doi.org/10.1007/s00226-004-0246-4
  • Yeoh, G.H.; Kwok, K.Y. 2009. Computational fluid dynamics in fire engineering: theory, modelling and practice. Butterworth-Heinemann, Oxford, UK. https://www.sciencedirect.com/book/9780750685894/computational-fluid-dynamics-in-fire-engineering
  • Yermán, L.; Wall, H.; Torero, J.L. 2017. Experimental investigation on the destruction rates of organic waste with high moisture content by means of self-sustained smoldering combustion. P Combust Inst 36(3) :4419-4426. https://doi.org/10.1016/j.proci.2016.07.052
Data source: Dialnet