Construcción izadaCondicionantes estructurales del sistema REVERSTOP

  1. Pérez-Valcárcel, Juan 1
  2. Muñoz-Vidal, Manuel 1
  3. Hermo, Víctor 1
  1. 1 Universidad de Coruña, España
Journal:
Informes de la construcción

ISSN: 0020-0883

Year of publication: 2020

Volume: 72

Issue: 559

Type: Article

DOI: 10.3989/IC.72993 DIALNET GOOGLE SCHOLAR lock_openOpen access editor

More publications in: Informes de la construcción

Sustainable development goals

Abstract

A big problem for the construction of buildings is the construction in height, what supposes a risk for the workers and a greater cost. The patented REVERSTOP system allows the construction at ground level and the subsequent lifting of each plant. The upper level is the first to be built on the ground floor. This level is raised through hydraulic jacks and a new level is built under it. The subsequent phases allow building the entire building, always from the ground level. In this article we analyze the structural aspects of the system. In the case analyzed, the structure of the building consists of aluminum profiles that form the resistant walls, the floors and the roof, with the same element. The calculations that support the effectiveness of the solution and the experimental results obtained in the tests carried out within a research project are provided.

Bibliographic References

  • (1) Martínez Calzón, J.; Asensio Marchante, J. (1988). Elevación de la cubierta del Palau Sant Jordi. Revista de Obras Públicas. 135, (3275): 1099-1109.
  • (2) Vanderklaauw, P. M. (1974). Method of erecting a multi-story building and aparatus therefor. US Patent 3831902.
  • (3) Feld, Jacob; Carper, Kenneth L. (1997). Construction Failure (second ed.). New York: John Wiley & Sons. pp. 311–315.
  • ISBN 0-471-57477-5.
  • (4) Zallen, R. M.; Peraza, D. B. (2003). Engineering considerations for lift - slab construction. ASCE (American Society of
  • Civil Engineers).
  • (5) Masih, Rusk (1994). Stability of Lift Slab Structure During Construction Stage. Structures Congress XII 271–77. ASCE,
  • http://cedb.asce.org/CEDBsearch/record.jsp?dockey=0086682.
  • (6) Briancon, Colbert. 2001. Procedimiento y dispositivo de realización semiautomática in situ, de depósitos metálicos.
  • Spanish Patent. 2228855.
  • (7) UNE-EN 1993-1-3:2012. Eurocódigo 3: Proyecto de estructuras de acero. Parte 1-3: Reglas generales. Reglas adicionales para perfiles y chapas de paredes delgadas conformadas en frío. Recuperado de https://www.aenor.com/normas-ylibros/buscador-de-normas/une/?c=N0049559
  • (8) Davies, J. M. (2000). Recent research advances in cold - formed steel structures. Journal of Construction Steel Research, 55(1-3): 267-288.
  • (9) Davies, J. M. (2006). Light gauge steel cassette wall construction - theory and practice. Journal of Constructional Steel
  • Research, 62(11): 1077-1086.
  • (10) Davies, J. M. (2007). Developments in stressed skin design. Thin-Walled Structures, 44(12): 1250-1260.
  • (11) Davies, J. M.; Fragos, A. S. (2004). The local shear buckling of thin-walled cassettes infilled by rigid insulation. Journal of Constructional Steel Research, 60(3-5): 581-599.
  • (12) York, C. B.; Pedreschi, R. (2000). The influence of geometry on the strength of shear wall panels on light steel construction. Construction and Building Materials, 14(5): 277-285.
  • (13) Veljkovic, M.; Johansson, B. (2007). Light steel framing for residential buildings. Thin-Walled Structures, 44(12): 1272-
  • (14) Craveiro H.D.; Rodrigues J.P.C.; Laím L. (2016). Buckling resistance of axially loaded cold-formed steel columns. Thin- Walled Structures, 106: 358–375.
  • (15) Hermo Sánchez, Víctor Manuel. (2011). Sistema Constructivo Industrializado in Situ COTaCERO, (Tesis doctoral): University of A Coruña.
  • (16) Rodríguez Cheda, J.B.; Pérez- Valcárcel, J. ; Hermo, V. (2011). Método para construir edificaciones de varias plantas mediante paneles portantes ligeros desde el nivel del terreno. Spanish Patent. 2370438.
  • (17) Pérez-Valcárcel, J.; Hermo, V.; Rodríguez Cheda, J.B. (2013). A New Building System: Structural Aspects of CotaCero System. En Second International Conference On Structures & Architecture. Guimarães, Portugal. Pp 321-322. Publicación electrónica Structures and Architecture: Concepts, Applications and Challenges – Cruz (Ed.) © 2013 Taylor & Francis Group, London, ISBN 978-0-203-79856-0 pp 1056-1063.
  • (18) Pérez-Valcárcel, J.; Hermo, V.; Rodríguez Cheda, J.B. (2013). Structural Behaviour of CotaCero System during the Lifting Process. En International Conference Transformables 2013. Sevilla, España. 2013. pp 169-174. Escrig, F., y Sánchez
  • J. (Ed.) Sevilla: Starbooks. ISBN 978-84-939565-3-0.
  • (19) Estévez Cimadevila, J.; Otero Chans, D.; Martín Gutierrez, E.; Vázquez Rodríguez, J. (2013) . Análisis experimental de las barras de madera laminada con sección tubular utilizadas en la construcción de una malla espacial. Maderas. Ciencia y Tecnología, 15(2): 153-170.
  • (20) Programa Conecta-Peme de la Xunta de Galicia (27-6-2014). Referencia IN852A 2014/12.